Filter
Top Products
CHAPTER
5-1
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
5
Configuring Features, Templates, Services, and
Users
After you install Cisco Unified IP Phones in your network, configure their network settings, and add
them to Cisco
Unified Communications Manager, you must then use the Cisco Unified Communications
Manager Administration application to configure telephony features, optionally modify phone
templates, set up services, and assign users.
This chapter provides an overview of these configuration and set up procedures. Cisco Unified
Communications Manager documentation provides detailed instructions for these procedures.
This chapter also explains how you control access to options on the Cisco Unified Communications
Manager User Options web pages.
For suggestions about how to provide users with information about features, and what information to
provide, see
Appendix A, “Providing Information to Users Via a Website.”
For information about setting up phones in non-English environments, see Appendix C, “Supporting
International Users.”
This chapter includes following topics:
• Telephony Features Available for the Cisco Unified IP Phone, page 5-2
• Creating Custom Phone Rings, page 5-9
• Configuring Corporate and Personal Directories, page 5-9
• Modifying Phone Button Templates, page 5-10
• Configuring Softkey Templates, page 5-11
• Setting Up Services, page 5-11
• Adding Users to Cisco Unified Communications Manager, page 5-12
• Managing the User Options Web Pages, page 5-12