Filter
Top Products
5-12
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 5 Configuring Features, Templates, Services, and Users
Adding Users to Cisco Unified Communications Manager
Adding Users to Cisco Unified Communications Manager
Adding users to Cisco Unified Communications Manager allows you to display and maintain
information about users and allows each user to perform these tasks:
• Access the corporate directory and other customized directories from a Cisco Unified IP Phone
• Create a personal directory
• Set up speed dial and call forwarding numbers
• Subscribe to services that are accessible from a Cisco Unified IP Phone
You can add users to Cisco Unified Communications Manager using either of these methods:
• To add users individually, choose User Management > End User from
Cisco
Unified Communications Manager Administration.
Refer to Cisco Unified Communications Manager Administration Guide for more information about
adding users. Refer to Cisco Unified Communications Manager System Guide for details about user
information.
• To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
identical default password for all users.
Refer to Cisco Unified Communications Manager Bulk Administration Guide for details.
Managing the User Options Web Pages
From the User Options web page, users can customize and control several phone features and
settings. For detailed information about the User Options web pages, refer to Cisco Unified IP Phone
7960G and 7940G Phone Guide.
Giving Users Access to the User Options Web Pages
Before a user can access the User Options web pages, you must use Cisco Unified Communications
Manager Administration to add the user to a standard Cisco Unified Communications Manager end user
group: choose User Management > User Groups.
For additional information, refer to Cisco Unified Communications Manager Administration Guide,
“End User Configuration” section.
Specifying Options that Appear on the User Options Web Pages
Most options that are on the User Options web pages appear by default. However, the following options
must be set by the system administrator by using Enterprise Parameters Configuration settings in Cisco
Unified Communications Manager Administration:
• Show Ring Settings
• Show Line Text Label Settings
• Show Call Forwarding
Note The settings apply to all User Options web pages at your site.