Cisco Systems 6921 IP Phone User Manual


 
Calling Features
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) 69
The information is sent to your system administrator.
Redial
Redial allows you to call the most recently dialed phone number by pressing a button.
Redial a Number
Press the Redial softkey.
To place the call on a particular phone line, get a dial tone on that line, then press the Redial softkey.
Shared Lines
Shared lines allow you to use one phone number for multiple phones.
You might have a shared line if you have multiple phones and want one phone number, share
call-handling tasks with co-workers, or handle calls on behalf of a manager.
For example, if you share a line with a co-worker:
When a call comes in on the shared line:
Your phone rings and the line button flashes amber.
Your co-worker’s phone rings and the line button flashes amber.
If you answer the call:
Your line button turns green.
Your co-worker’s line button turns red.
When button is red, that line cannot be used to barge in on the call or used to make
another call.
If you put the call on hold:
Your line button flashes green
Your co-worker’s line button flashes red.
When the line flashes red, your co-worker can pick up the call.
Speed Dial
Speed-dial features allow you to place a call by pressing a button, entering a code, or selecting an item
from the Call History list. Before you can use speed-dial features on your phone, you must set up
speed-dial on your User Options Web pages.
Depending on setup, your phone can support these speed-dial features: