Cisco Systems 6921 IP Phone User Manual


 
Calling Features
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) 63
Sign In and Out of a Hunt Group
1. Press the Hunt Group button to sign in.
Visual confirmation displays briefly.
2. Press the button again to sign out.
Signing out of a hunt group does not prevent non-hunt group calls from ringing your phone.
Intercom
Intercom allows you to place and receive one-way calls using a dedicated intercom line.
When you place an intercom call, the recipient’s phone auto-answers with mute activated (whisper)
and broadcasts your message through the recipient’s speakerphone—or through the headset or
handset, if one of these devices is active.
After receiving the intercom call, the recipient can initiate two-way audio (connected) to continue
the call.
Place an Intercom Call
1. Press the Intercom button.
If your phone auto-dials the intercom code, begin speaking after the alert tone. Otherwise, go to
Step 2.
2. Enter the intercom code and begin speaking after the alert tone.
Receive an Intercom Call
When you receive an intercom call, you hear an intercom-alert tone and your phone auto-answers the
call. Any current call activity that you are engaged in continues simultaneously, but the intercom caller
cannot hear you.
To speak to the intercom caller, press the active Intercom button.
Line Status
Line Status indicators allow you to view the state of a phone line that is associated with a
speed-dial button.
Your system administrator sets up Line Status indicators on your phone.