Filter
Top Products
CONNECTING PHONES: MULTI-LINE PHONES
Call Handling:
TalkSwitch extensions 111, 112, 113, and 114 are all wired to the four line
phone. When a call is transferred to extension 111, line 1 on the phone
will show as active; similarly calls on extension 112 will show line 2 as
active etc.
Through the software, you may configure each incoming line to ring any
given number of extensions, including all the extensions. However, be
careful if incoming line 1 is configured to ring extensions 111, 112, 113,
and 114. An incoming call will ring all four phone lines (lines 1 through 4)
at the same time. Instead configure incoming line 1 to ring extension 111,
line 2 to ring extension 112, etc.
WWW.TALKSWITCH.COM 7
CONNECTING PHONES, FAXES AND DEVICES TO TALKSWITCH
E1 E2 E3 E4
TalkSwitch Jacks
Incoming
Phone Lines
Extensions 111, 112, 113, & 114
4 Line Phone
Line Splitter
Line Splitter
Ext 112
To Jack E2
Ext 112
To Jack E2
Ext 113
To Jack E3
Ext 114
To Jack E4
Line Splitter
Connector
To Tel. Line L1/L2
To Tel. Line L3/L4
Male (4 pin)
L1 (2 pin)
L2 (2 pin)
RJ-11 Cord
2 line (4 wire) male to male connector
RJ-11 Coupler
2 line (4 pin) female to female connector
Line Splitter
L1 and L2 are single line (2 pin) female connectors
that join to a two line (4 pin) male connector. A4
pin female receptical will indicate thatyou have a
duplexer and not a line splitter.