Talkswitch E3 IP Phone User Manual


 
3.4 Save Settings to TalkSwitch
New settings must be saved to the
TalkSwitch phone system for them to take
effect.
Choose ‘File’ then ‘Save to TalkSwitch’. A
progress bar will show the data exchange
to the TalkSwitch unit and should take
only a few seconds to complete.
3.5 Connect Fax to TalkSwitch
Connect the fax machine to the back of the TalkSwitch unit, as shown below. The
connections should correspond to the settings you have made in the software.
3.6 Reconnect Phones and other Devices to TalkSwitch
You may wish to add the following telephone equipment. It is not necessary to add
all these devices or lines
WWW.TALKSWITCH.COM 11
CONNECTING PHONES, FAXES AND DEVICES TO TALKSWITCH
Incoming Telephone
Line with Distinctive Ring
Fax Machine
Connected to
Extension 118
Incoming Telephone
Line with Distinctive Ring
Fax Machine
Connected to
Extension 113
TalkSwitch 24-CA faxconnections
TalkSwitch 48-CA and 48-CVA faxconnections
Additional Incoming
Voice Phone Lines
TalkSwitch 24-CA office connections
TalkSwitch 48-CA and 48-CVA office connections
Additional
Incoming
Voice Phone Line
Incoming Telephone
Line with Distinctive Ring
Incoming Telephone
Line with Distinctive Ring