Filter
Top Products
CONNECTING PHONES: TWO LINE PHONE - OPTION 1
Call Handling:
TalkSwitch extensions 111 and 112 are wired to a two line phone. When a call
is transferred to extension 111, line 1 on the phone will show as active; simi-
larly calls on extension 112 will show line 2 as active.
Through the software, you may configure each incoming line to ring any given number
of extensions, including all extensions. However, be careful if incoming line 1 is con-
figured to ring both extensions 111 and 112. An incoming call will ring both phone
lines at the same time. Instead configure incoming line 1 to ring extension 111, and
line 2 to ring extensions 112.
WWW.TALKSWITCH.COM 5
CONNECTING PHONES, FAXES AND DEVICES TO TALKSWITCH
E1 E2 E3 E4
TalkSwitch Jacks
Incoming
Phone Lines
Extensions 111 and 112
L1 OR L1/L2
L2
Pin 2
Pin 1
Single Line RJ-11 Jac
k
Ext 111
To Jack E1
Ext 112
To Jack E2
L1 OR L1/L2
L1 OR L1/L2
L2
L2
To Tel. Line L1 or L1/L2
To Tel. Line L2
Each phone is connected to a single line RJ-11
cable. The jacks at the end of the cablesshould
have two pins as shown below..
Two line phones must have these two phone
jacks labeled “L1/L2” and “L2”. The jack
labeled “L1/L2” will have 4 pin connectors and
the “L2” jackwill have 2 pin connectors.