Filter
Top Products
3. DISTINCTIVE RING FAX DETECTION
3.1 Connect TalkSwitch to the PC, then Open the TalkSwitch Software
Connect TalkSwitch to your PC and open the TalkSwitch Configuration Software. For
details refer to the “TalkSwitch Installation and User Guide”.
3.2 Set Distinctive Ring Numbers
One of the incoming lines will have a distinctive ring number assigned to it. This
number will need to be recognized by TalkSwitch as an incoming fax line. Follow the
steps below.
3.3 Set Fax Detection on Distinctive Ring Number
Configure the fax detection as shown
WWW.TALKSWITCH.COM 10
CONNECTING PHONES, FAXES AND DEVICES TO TALKSWITCH
Step E
Step D
Step C
Step B
Step A
Choose “System Information” and then
“Telephone Lines” - See Arrows
2
1
Choose the Line number for the
incoming fax.
Activate the Line
Enter the Line tele-
phone number. This is
the number people use
to call your office.
Enter the distinctive ring
number on this line.
This is the number peo-
ple will call to getyour
fax machine
STEP C
STEP B
Step A
Choose “System Information” and then
“Fax Information” - See Arrows
2
1
Enter the Distinctive Ring number for the incoming fax. This is the number people will
call to get your fax machine, and is the same as Step “E” above.
Enter the local extension
number for your fax. This
is the extension you will
plug your fax machine
into.
ForTalkSwitch 24-CA, we
recommend thatyou put
your fax into extension
113.
ForTalkSwitch 48-CA and
48-CVA, we suggestyou
put the fax into extension
118.