Filter
Top Products
CONNECTING PHONES, FAXS & DEVICES TO TALKSWITCH
WHAT WILL MY PHONE SYSTEM DO?
Default Equipment Settings:
Simply connect the Talkswitch to your phone system (as shown below).
Your phone system will do the following:
· An incoming call on any line will ring all local extensions.
· A receptionist can manually transfer calls to local extensions or
voicemail.
· Every local extension gets a voicemail box.
· Extension 114 (E4) works during a power failure.
Additional Capabilities can be added by installing the TalkSwitch Software.
SUGGESTED CONFIGURATION
Connections from the TalkSwitch to all your telephone devices and computer. you
need not add all of the phones. The fax machine should be put into local extension
‘E8’ for a TalkSwitch 48-CA and 48-CVA, or ‘E3’ for the TalkSwitch 24-CA.
WWW.TALKSWITCH.COM 1
TALKSWITCH QUICK GUIDE
CONNECTING PHONES,
FAXES & DEVICES TO
TALKSWITCH
CT.TS005.504.EN - 03
LAN
Music-on-Hold
3.5mm jack
P.A.
3.5mm jack
‘E1’ jackto
Extension 111
‘E2’ jackto
Extension 112
‘E3’ jackto
Extension 113
‘E4’ jackto
Extension 114
‘E5’ jackto
Extension 115
‘E6’ jackto
Extension 116
‘E7’ jackto
Extension 117
‘E8’ jackto
Extension 118
Incoming Phone
Lines
L1 to L4
Remote Extensions 211, 212 ... 218
Serial connection to PC
computervia an RS232
serial cable
USB connection to PC
computervia a USB cable
ACconnection to power outlet
TalkSwitch Back Panel
TalkSwitch 48-CA/ 48-CVA shown here.
Model Differences:
TalkSwitch 24-CA
2 Lines In (L1/L2 and L2 only)
4 Local Extensions(E1 - E4 only)
No Lan Connection
TalkSwitch 48-CA and -CVA
4 Lines In (as shown)
8 Local Extensions (asshown)
LAN Connection
(receptionist)
(fax)
*Memory card slot on side.