Filter
Top Products
121
3
For the connection to the telephone line, connect the modular jack
directly as shown below or connect via Inline Coupler.
Caution on operation of the product
To use this product, operate as instructed below since this is
designed to be embedded in the FIVA.
1. The product must be set in a case upon use.
2. Do not leave the product in the area such as hot and humid or
exposed to direct sunlight since the product is precisely designed.
3. Do not spill any liquid such as water on the product.
4. Do not touch the electric terminals without discharging static fully
otherwise it will cause electric static damage.
5. In case the product is used exceeding the maximum specification,
there is possibility that LSIs inside might be damaged permanently.
Therefore, it is favorable to use the product under the normal
operation conditions. If the product is left above the normal
operating conditions, it might be possible to affect to the reliability
of the LSIs.
Modular cable
Modular cable
Telephone Line
Telephone Line
Inline Coupler