Filter
Top Products
5900335 © 2005 JCM-American Corporation
12-1
Optipay
™
CC
A-66 Coin Changer
Section 12
12 PALM PILOT
®
USAGE
A66US Changer Program Usage
This section describes the use of a Palm Pilot
®
to
configure the Optipay™ CC A-66 Coin Changer
using PalmA66
©
and/or PalmEMP
©
software.
Requirements
•
A Palm Pilot
®
Handheld – All M100, 500 and
Tungsten Series handhelds (See Figure 12-1)
•
Centaur Changer Communication Cable
•
JCM A66US Changer Program for the Palm
Pilot
®
*
•
PC with Windows 2000 or XP O/S
•
Palm Pilot
®
Application Suite
•
Hot Sync Cradle or Cable*.
Managing Coin and Configuration Set-
tings
1. Turn on the Palm Pilot
®
and select the JCM
Palm A66US application (See Figure 12-2).
2. Select the
Settings
tab on the main menu
screen (See Figure 12-3 a).
3. Select the
Operating modes…
tab on the
menu screen (See Figure 12-4 a).
*Refer to the Palm Pilot
®
user’s manual
for program installation and Hot Sync
instructions.
Figure 12-1 Typical M100/500 Series Palm
Pilot
®
Handheld & Software
a
Figure 12-2 Palm A66US Selection
Figure 12-3 Selecting Settings
a
Figure 12-4 Selecting Mode
a