Filter
Top Products
5900335 © 2005 JCM-American Corporation
3-1
Optipay
™
CC
A-66 Coin Changer
Section 3
3 DESIGN
This section describes the general design of the
Optipay™ CC A-66 Coin Changer and the various
Coin Validator components within it important to
the operation of the device. The following items
will be discussed:
•
Return lever, keyboard, pilot lights, interfaces,
DIP Switch block, product labels
•
Tube cassette, pay out set, and filling level
sensors
The Coin Validator
Coins inserted into the Coin Validator (3)
(See Figure 3-1 ) pass through the Coin Insertion
Funnel (11) into the validation area of the device.
Here the coin’s properties are compared with the
values contained in the stored acceptance bands
data. Rejected coins from the Coin Validator pass
into the return area tray of the Vending Machine. In
the event of a sale, accepted coins are either
directed to one the four Tube Cassettes (6) or into
the Cash Box below them.
Figure 3-1 A-66 Design Features
Device Overview