Filter
Top Products
5900335 © 2005 JCM-American Corporation
8-1
Optipay
™
CC
A-66 Coin Changer
Section 8
8 CLEANING
This section explains how to clean the Optipay™
CC A-66 Coin Changer.
Only wipe the Coin Validator from time to time
with a damp cloth (use luke warm water containing
a mild dish cleaning liquid):
1. Remove the Vending Machine’s main AC
power plug.
2. Press up on the locking catch lever and open
the Coin Validator panel to the left
(See Figure 8-1 [1]).
3. Wipe the coin runway clean once inside the
coin validation area.
4. Close the Coin Validator panel and gently
press in on the "Close" arrow white dot until
the metal spring engages behind the lever and
a click is heard (See Figure 8-1 [2]).
5. Reconnect the Vending Machine to the main
AC power supply.
Under no circumstances allow the cloth
to be wet enough to allow excess fluid
to run into the device. Otherwise the
printed circuit board (pcb) may be
damaged.
Do not use any solvents or scouring
agents which can attack the plastic
surfaces of the device.
Figure 8-1 Opening and Closing the Coin Validator’s Access Panel