Filter
Top Products
Quartet 3500 User Guide ~ 5th Edition ~ 17th January ’03 ~ 4393
54
Note
If you have new messages they will be
played after you have entered your
security code.
To check for messages
remotely
Dial your telephone number
and wait.
When you hear your outgoing
message, press the
✱
button.
You will hear, “Please enter
your security code”.
Enter your 3-digit PIN code.
If you have new messages, you
will hear, “You have (n) new
messages”, and your messages
will be played back.
If you have no new messages,
you will hear, “You have no
new messages, to hear main
menu press 1”.
You have 8 seconds to press
the 1 button before your
answering machine hangs up.
Note
If you enter your security PIN code
incorrectly you will hear, “Incorrect
security code, please enter your
security code”. Re-enter your security
PIN code. If you enter it incorrectly the
second time, you will hear, Incorrect
security code, thank you for calling”,
and will then hang up.
Time saver
The time saver feature is useful if you
are out and want to ring in and check
if you have received any new messages.
If your answering machine is set to
time saver you can check whether you
have new messages or not before your
answering machine actually answers
your call. If you have new messages
your answering machine will answer
after 2 rings, if you do not have any
new messages, it will not answer until
6 rings. This enables you to hang up
before you are connected, saving you
time and the cost of a call. See page 37
to set the answer delay to time saver.
Note
You cannot use this feature if you
have BT Answer 1571 or Call
Minder active, as the call will be
intercepted before the 20 rings.