Filter
Top Products
Quartet 3500 User Guide ~ 5th Edition ~ 17th January ’03 ~ 4393
37
To adjust the base unit
loudspeaker volume
The loudspeaker volume
ranges from 0-9 plus H, where
0 is off and H is the maximum
level. The loudspeaker volume
will be set at 5.
Press the VOL + button on the
base to increase the volume.
Press the VOL – button on the
base to decrease the volume.
The message display on the
base will show the volume
level on each press.
Switch on/off using the
handset:
Press the UP or DOWN button
until the display shows
Answer
Off On
.
Press either the OFF or ON
option button.
Your chosen setting will be
announced, “Answer on, your
outgoing message is…”, or,
“Answer off ”.
If the answering machine is
switched ON, the handset
display will show the icon.
Vol
Vol
Vol
Vol
If you adjust the volume when
the answering machine is not
being used, a beep sounds at
each press. When the volume
reaches its highest or lowest
level two beeps will sound.
Answer delay
Answer delay sets the number of times
your Quartet 3500 will ring before the
answering machine picks up your call
and starts playing the outgoing
message. Your Quartet 3500 will be set
to answer after 6 rings. You can change
this setting to between 2 and 9 rings or
time saver (TS). For more information
on time saver, see page 54.
To change the answer delay
setting via the base unit
Press and hold the Skip
ᮣ
button on the base unit until the
current setting is announced,
then release.
Press and release the Skip
ᮣ
button to move through the
settings, with each press the
options will be announced and
will also be shown on the base
unit display, i.e 8, 9, Time
Saver, 2, 3, 4, 5, 6, 7.
Skip
Skip