Filter
Top Products
Quartet 3500 User Guide ~ 5th Edition ~ 17th January ’03 ~ 4393
44
Pick up the handset.
Press the UP or DOWN button
until the display shows
Answer
Settings
.
Press the OK option button.
Press the UP or DOWN button
until the display shows
Outgoing Message
.
Press the OK option button.
Use the UP or DOWN button
to select the outgoing message
you want to delete, either:
Answer Only or Answer and
Record.
Press the OK option button.
The display will show
Outgoing
message
, and the handset voice
prompt will automatically
announce the outgoing message
to be deleted.
Press the DEL option button
during message playback
to delete it and re-instate the
pre-recorded message.
The prompt will announce,
“Your outgoing message is”, and
the original pre-recorded
outgoing message will be played.
Press the CLEAR button until
you return to the standby screen.
OK
OK
DEL
Note
You cannot delete the pre-recorded
outgoing messages. If the current
outgoing message selected is the pre-
recorded message and you try and delete
it, you will hear a beep and the pre-
recorded message will be played to you.
To delete your own outgoing
message and re-instate the
pre-recorded outgoing
message via the handset
You can delete your personalised
outgoing message and return
to your Quartet 3500’s pre-
recorded outgoing message.
First select the outgoing
message you want to delete,
see opposite column on this page.
Whilst your selected outgoing
message is playing press the
DELETE button on the base unit.
The message will stop playing
and you will hear a short beep,
then the default pre-recorded
outgoing message.
To delete your own outgoing
message and re-instate the
pre-recorded outgoing
message via the base unit
OK
Del