Filter
Top Products
Troubleshooting Guidelines
The View Administration Option
5-11
The View Administration Option 5
If you are using static addressing and encounter problems, use the following procedure to verify
the current values of system parameters and file versions.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Mute 8 4 3 9 # (Mute V I E W #)
The following text displays left-justified at the top of the display:
2. Press the * button at any time during viewing to display the next name and system value pair
from the list below, returning to the first pair after the last pair has been displayed.
Press the # button at any time during viewing to terminate the procedure and restore the user
interface to its previous state.
■ Also use the ADDR option to view IP addresses (see “Static Addressing
Installation” in Chapter 3 of 4600 Series IP Telephone Installation Guide). These
may have been entered incorrectly. Verify whether you were provided with correct
IP addresses.
■ If PROCPSWD has been administered as indicated in Server Administration, on
page 4-1, you need to type the Local Procedure password after pressing Mute and
before pressing V I E W.
Press the Mute key momentarily. Do not press this key while pressing other keys.
The 4630 IP Telephone does not have a dedicated Hold button; for all other 4600
Series IP Telephones, pressing the Hold button instead of the Mute button will also
work.
View settings
*=next #=exit