Filter
Top Products
Introduction
3-1
3
Requirements 3
Program
Introduction 3
The 4600 Series IP Telephones use Internet Protocol (IP) technology with Ethernet line interfaces.
The IP telephones supplement the existing Avaya IP Solutions platform. This feature provides the
user with the capability to natively administer and maintain the new 4600 Series IP Telephones.
The 4600 Series IP Telephones provide support for DHCP and TFTP over IPv4/UDP which
enhance the administration and servicing of the phones. These phones use DHCP to obtain
dynamic IP addresses and TFTP to download new versions of software for the phones.
The 4600 Series IP Telephones provide the ability to have one connection on the desktop for both
the telephone set and the PC using the telephone’s built-in hub.
Hardware Requirements 3
Before plugging in the 4600 Series IP Telephone, verify that all of the following requirements have
been met. Failure to do so will prevent the telephone from working and may have a negative
impact on your network.
The following hardware is required for 4600 Series IP Telephones to work properly:
Switch software release Telephone model(s) Telephone software release
DEFINITY
®
R8.4 4612, 4624 R1.0
DEFINITY
®
R9.0
4612,4624 R1.1
DEFINITY
®
R9.5 or later 4606, 4612, 4624 R1.5 or later
DEFINITY
®
R10 4630 or 4630SW R1.60 or later
Avaya Communication Manager
Software 1.1 or later
4610SW, 4620,
4620SW, 4690
R1.70 or later
Avaya Communication Manager
Software 1.1 or later
4602 or 4602SW R1.61 or later