Filter
Top Products
4600 Series IP Telephone LAN Administrator’s Guide
The Reset Administrative Option
5-10
Restart the Telephone 5
Use the following procedure to restart the telephone.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Mute 7 3 7 3 8 # (Mute R E S E T #)
The following text is displayed left-justified at the top of the display:
2. Press the # button to reset values to their defaults, or * to continue.
If you press the # button, the following text is displayed left-justified at the top of the display
while the system values are reset to defaults:
Once the system values are reset, the following prompt is displayed:
3. Press the * key to terminate the procedure without restarting the telephone.
Press the # key to restart the telephone.
The remainder of the procedure depends on the status of the boot and application files.
Refer to Appendix A of the 4600 Series IP Telephone Installation Guide.
Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons. The 4630 and 4630SW IP Telephones do not have a dedicated Hold
button; for all other 4600 Series IP Telephones, pressing the Hold button instead of
the Mute button will also work.
Reset values?
*=no #=yes
Resetting
values.
Restart phone?
*=no #=yes