Filter
Top Products
GX2411ci English I/B ver. 09010A-1
31 09010A-1
OWNER
’
S MAN #
GX2411ci
VER. 09010A-1
PAGE: 31 English version
• Refer to the section "Improving Cordless Reception".
Interference on
reception
• Choose an alternate channel using the SCAN button on the
handset.
•
Refer to the section "Improving Cordless Reception".
Cannot access
Remote Operation
•
The password you have entered may be incorrect. Enter the
correct password during OGM playback or within 7 seconds
after the OGM has finished playing.
Excessive static
•
Refer to the section "Improving Cordless Reception".
Incoming calls/ Memo
messages are cut off
•
The GX2411CI will stop recording after 7 seconds of
continuous silence or 7 seconds after the caller hangs up
(VOX feature).
•
Each incoming message recording is limited to two minutes
to conserve message storage space.
Announces
“Memory Full ”
•
The 15-minute recording limit may have been reached.
Erase old messages to make room for new messages.
The Caller ID panel is
blank
• Check the power connection.
•
Check the telephone line cord connections.
•
Check the batteries for proper installation.
The Caller ID does not
show the caller's
name and / or phone
number.
•
The Caller ID unit will not function until you have Caller ID
service provided by your local phone company. Call your
local phone company to have Caller ID installed on your
telephone line.
• If you pick up the phone before the second ring, the caller
information will not be correctly received. If you have
telephone answering device (TAD) connected with the unit,
set the TAD to answer after two ring s or more.
•
If it is a blocked call or an out-of-area call, the caller's name
and / or phone number will not appear on the display.
•
If only the caller's phone number appears on the display, it
may be a Single Data Message Format (SDMF) call, as
opposed to a Multiple Data Message Format (MDMF) call.
Please call your local phone company to see which service
you have.
Random characters
and / or "NO DATA"
appear on the LCD
Display.
•
On rare occasions, the Caller ID information sent by the
telephone company may have an error in the transmission.
This is not the fault of your Caller ID unit. It can only capture
and store the data that was received.
Cannot get Call
Waiting identification
on the LCD Displayl.
•
Subscription to Caller ID Call Waiting (CIDCW) is required
from your local phone company for the CIDCW function to
operate properly. Call you local phone company for details.