Filter
Top Products
GX2411ci English I/B ver. 09010A-1
09010A-1 26
OWNER
’
S MAN #
GX2411ci
VER. 09010A-1
PAGE: 26 English version
3.
Enter your 3 digits area code.
4.
If your area is not Split area, press SCAN / PRG button to save
and exit.
5.
If your area is one of the Split area, enter neighboring area
code.
817 = User's area code, 913 and 412 = Neighboring area code.
6.
Press SCAN / PRG button to save and exit.
NOTE:
If the number is incorrect, press DEL button and restart on step 3.
E. HOW TO SET CALLBACK NUMBER
This is the number of digits to be called back when making a call using the Call Record
and when the area code of the incoming telephone number is same
as your area code. Refer to Callback Dial Operation on page 24.
The factory setting is 7 digits.
1.
Press SCAN / PRG button.
2.
Press 4 button, or press (+) button four times. The Callback
Number is displayed.
3.
Press or button to change the Callback Number.
The Callback number scrolls as 07 10 07 10.
4.
Press SCAN / PRG button to save and exit.
F. HOW TO SET RINGER ON / OFF
1.
In standby mode, press SCAN / PRG button.
2.
Press 5 button, or press (-) button three times. The current
mode is displayed.
3.
Press or button to change mode.
4.
Press SCAN / PRG button to save and exit.
G. HOW TO SET TIME
NOTE:
The time set is for the LCD Display time. If CALLER ID signal comes in, the time
will adjust automatically.
1.
In standby mode, press SCAN / PRG button.
2.
Press 6 button, or press (-) button two times. The current time
is displayed.
3.
Enter 2 digits hour. The position to edit is blinking.
Use button to move the cursor to the left.
4.
Enter 2 digits minute.
5.
Press 1 for AM and 2 for PM.
6.
Enter 2 digits month.
7.
Enter 2 digits day.
8.
Press SCAN / PRG button to save and exit.
H. HOW TO ADJUST THE CONTRAST OF LCD DISPLAY
1.
In standby mode, press SCAN / PRG button.
2.
Press 7 button, or press (-) button once. The current contrast is displayed.
3.
Press or button to change the contrast.
The contrast scrolls as 01 02 03 (Three steps).
4.
Press SCAN / PRG button to save and exit.
NEW CALL / MESSAGE INDICATOR
On the base unit, NEW CALL LED indicator will flash every 1second when new call comes
in. NEW CALL LED indicator will flash every 2 second when voice mail message comes in.
On the handset, NEW CALL LED indicator will flash every 2 seconds.
817 _ _ _ _ _ _
AREA CODE
817 913 412
AREA CODE
07
CALLBACK NUMBER
10
CALLBACK NUMBER
RINGER ON
RINGER OFF
12:20 AM 10/20
TIME SET
02
CONTRAST