Filter
Top Products
GX2411ci English I/B ver. 09010A-1
23 09010A-1
OWNER
’
S MAN #
GX2411ci
VER. 09010A-1
PAGE: 23 English version
Review Previous Message :
Press
7
,
to go to the previous message.
Repeat Messages:
Press
8
, to restart the same message from the beginning.
Skip Message :
Press
9
, to skip forward to the next message .
Erase a Message :
Press 0, to erase a particular message.
Stop Message Playback :
Press
*
, to terminate message playback.
NOTE:
The GX2411CI will announce
“End of message.”
when all messages have been
played.
CALLER ID OPERATION
INTRODUCTION TO CALLER ID AND CALL WAITING ID
The GX2411CI Caller ID / Call Waiting ID devices allow you to take advantage of the
Caller Identification delivery service offered by your local telephone company. For more
information, you can refer to the following Question and Answer table:
QUESTIONS ANSWERS
What is Caller ID?
Caller ID is a device that identifies the calling party before
you answer a call. This device can be used to screen
unwanted calls and eliminate harassment from annoying
calls.
What is Call Waiting ID?
Call Waiting ID is a device that identifies the call waiting
party before you answer a call.
How does Caller ID and
Call Waiting ID work?
When used with Caller ID / Call Waiting ID service, the
Caller ID / Call Waiting ID device displays the name (if
available), and the telephone number (if available) of the
person calling before you answer your telephone.
Who provides Caller ID
service?
Your local telephone company. However, not all local
telephone companies provide Caller ID service. Please call
you local phone company to confirm that the service is
available before you install the device.
How can I activate my
Caller ID?
For your Caller ID unit to function, you must first arrange
with your local telephone company to have Caller ID / Call
Waiting ID service installed on your line. There is an extra
charge added to your monthly telephone bill for this
service. Before using this unit, please read this instruction
manual carefully.
RECEIVING NEW CALL
When you receive a new call, the call information is stored under
CALLER ID Call Record. In standby mode, you can find how
many calls and new calls you have. The "NEW" segment of LCD
Display and NEW CALL LED indicator will flash if there is new
call(s).
When you receive a call, the system displays the caller information sent by the telephone
company, called a Call Record. The Call Record consist of the
following information.
a. The caller's name (if available)
b. The caller's telephone number
c. The time and date of a call
d. A call record number
If there are no call records, the LCD Display shows "NOCALLS".
VIEWING CALL RECORDS AND NEW CALL RECORDS
NEW
ALL: 10 NEW: 05
11.59pm 10/14 call# 03
817-456-7890
NAME
NO CALLS