Filter
Top Products
GX2411ci English I/B ver. 09010A-1
09010A-1 28
OWNER
’
S MAN #
GX2411ci
VER. 09010A-1
PAGE: 28 English version
11:10 AM 10/10 CALL# 03
234-567-8901
NO NAME
NO NAME
The Caller Name might not be available from the caller's
area.
11:10 AM 10/10 CALL# 03
234-567-8901
JOHN SMITH *
REPEAT CALL
This blinking * indicates that the Call record information
comes multiple.
TALK [ M ]
TALK
The handset is ON and ready for you to dial.
[ M ] means that the volume level is medium.
OUT OF RANGE
OUT OF RANGE
The handset has tried to call but failed or the handset is
moved out of range from the base unit in talk mode.
MSG WAIT ON
MSG WAIT ON
This means that your voice mail box has a new message
right now.
MSG
ALL:10 NEW:05
MESSAGE WAITING MARK
The MSG mark means that your voice mail box has a new
message.
IMPROVING CORDLESS RECEPTION
Follow these guidelines to improve cordless sound quality:
• Select an area to install the GX2411CI where it is closest to the center of your home
or office. This will improve the operating range of the unit.
•
Keep the GX2411CI base unit away from electrical equipment. Radio Frequency
Interference (RFI) is sometimes generated by these appliances, which can cause a
degradation in cordless reception.
•
Keep the handset batteries charged as much as possible. Weak handset batteries
can limit the range of cordless operation.
MAXIMIZING BATTERY LIFE
Repeated use or recharge of Ni-Cd batteries without periodic full discharge results in
reduced useable charge time. When you notice the usable charge duration decreasing,
fully discharge the Ni-Cd battery and recharge as described:
DISCHARGING
1. Unplug the telephone line cord from the GX2411CI.
2. Make sure that the adapter is connected.
3. Lift the handset out of the base cradle.
4. Press the TALK button of the handset (IN USE LED indicator should light) and start
discharging.
Once the BATT LOW LED indicator starts flashing, it means that the battery level is low.
Let it fully discharge for 12 hour. Once the Ni-Cd battery is fully discharged, you may now
charge the battery to its full capacity.
CHARGING
1.
Make sure the adapter and telephone line cord is connected to the GX2411CI.
2.
Place the handset on the base cradle. The CHARGE LED indicator of the base unit
will light steadily.
3.
Leave the handset charging on the base for 20 hours continuously to get a maximum
charge.