Filter
Top Products
GX2411ci English I/B ver. 09010A-1
15 09010A-1
OWNER
’
S MAN #
GX2411ci
VER. 09010A-1
PAGE: 15 English version
2. Press the RE/PA button. This will automatically redial the last telephone number you
called (Up to 31 digits).
STORING TELEPHONE NUMBERS INTO MEMORY DIALING DIRECTORY
In addition to your Call Records, you can store up to 20 speed dial names and telephone
numbers into memory and you can then dial any of the stored phone numbers. You can
also transfer a Call Record into the Memory Dialing Directory.
A. STORING TELEPHONE NUMBERS INTO THE SPEED DIALING LIST
1. Make sure that the handset is in the standby mode.
2. Press and release the handset MEMO button. The handset will beep once.
3. Press the (+) or (-) button to locate an available location or enter a memory location.
There are 20 memory locations available. Memory location below 10 need a leading
zero such as 01, 02 to 09. If the memory location is available, the LCD Display shows
the memory location number and the "EMPTY" message. The flashing line or cursor
indicates that the phone is ready for data entry.
4. Enter the name, character by character. You can enter up to 15 characters. Locate
the character on the keypads 2 through 9. Press once to enter the first character,
twice for the second character, etc. See Name Entry Table. Use button to
move the cursor back and forth through the name entry line. To create a space
between characters and words, press the button twice after the last entered
character.
NAME ENTRY TABLE
Key 1
st
2
nd
3
rd
4
th
5
th
1 & ( ) 1 space
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0
* * #
# space
Example: JOHN 1
J Press 5
O Press 6 three times
H Press 4 two times
N Press 6 two times
(Space) Press button two times
1 Press 1 four times
5.
Press handset MEMO button to store the name field. The cursor or marker moves to
the telephone number line entry.
6.
Enter the telephone number you want to store. You can enter up to 24 digits. If you
make a mistake, press button to delete the character on the left of the cursor.
7. Press handset MEMO button to save and exit. But if you want to register more
memory, you can press (+) or (-) button instead of handset MEMO button.
B. STORING TELEPHONE NUMBERS INTO MEMORY DIALING DIRECTORY FROM
THE CALLER ID CALL RECORDS
1. Make sure that the unit is in the standby mode.
2. Locate the Call Record that you want to copy by pressing (+) or
(-) button.
817-456-7890
NAME
817-456-7890
SAVE TO #10