Filter
Top Products
GX2411ci English I/B ver. 09010A-1
17 09010A-1
OWNER
’
S MAN #
GX2411ci
VER. 09010A-1
PAGE: 17 English version
In some cases, such as PABX or long distance service, a pause may be needed in the
dialing sequence. Pressing the RE/PA button inserts a four-second delay between dialed
numbers.
FLASH FUNCTION
Used to access custom calling features such as Call Waiting or Three-Way Calling
provided by your local phone company. Flash can also be used to restore a dial tone to
make a new call.
CHANNEL SELECTION (40 Channels)
A. AUTO CHANNEL SCAN
When you place or receive a call and handset TALK button is pressed, the GX2411CI
auto-scans for a clear channel.
Once it finds a clear channel, the handset LCD Display symbol will light steadily.
B. MANUAL CHANNEL SCAN
If the existing channel becomes noisy or starts having
interference, you can either move closer to the base unit
or press the SCAN/PRG button on the handset until better (Figure 16)
reception is found.
OUT OF RANGE WARNING
The handset and base unit communicate up to a certain maximum
range. The distance can be affected by weather, power lines, or even
other cordless telephones.
If you are far away from the base unit, the handset beeps and "OUT OF RANGE" is shown
on the LCD display to warn you that the background noise level is too high for proper
communication between the handset and the base unit.
When you hear this sound and see the "OUT OF RANGE" display, you should move closer
to the base unit. Otherwise, the call will automatically cut off after 30 seconds.
LOW BATTERY WARNING
When the handset battery voltage level is low, the handset LOW symbol is shown on the
LCD Display.
Return the handset on the base cradle to charge.
PAGING FUNCTION
If you have misplaced the handset or need to alert the person nearby
the handset, press the PAGE button on the base unit. Each press of
this button will activate the handset to beep for 30 seconds and LCD
Display shows "BASE CALL" while it is being paged by the base unit.
NOTE:
Even if the handset is in RING OFF mode, the base unit can page the handset.
ANSWERING MACHINE OPERATION
The GX2411CI features a sophisticated Digital Answering System. Incoming Messages
(ICMs), Outgoing Message (OGM) and Memo messages are stored electronically into
digital memory. Messages are accessed instantly and arranged compactly in this memory.
The GX2411CI can store 15 minutes of messages (ICMs, OGM and Memos combined).
NOTE:
The maximum Incoming Message (ICM) recording time is 2 minutes.
VOICE MENU SYSTEM
OUT OF RANGE
BASE CALL