AT&T EP5632/EP5632-2 Answering Machine User Manual


 
44
System setup
LCD Contrast
You can adjust the telephone base LCD screen
contrast to one of eight levels to suit different
lighting conditions.
To adjust the LCD contrast:
1. Press the MENU softkey in idle mode to enter
the main menu.
2. Press the UP and DOWN NavKeys to select
Settings, then press SELECT softkey to enter
the Settings menu.
3. Press the UP and DOWN NavKeys to highlight
LCD Contrast, then press SELECT softkey.
4. Press the LEFT and RIGHT or UP and DOWN
NavKeys to decrease or increase the LCD
contrast.
5. Press the SET softkey to save the setting.
Clear Voice Mail
If you subscribe to voice mail services provided
by the local telephone company, the VOICEMAIL
light on the telephone base will flash when you
have a new voice mail message. If your telephoneIf your telephone
system indicates that there is voice mail, but
you are sure that you have no new voice mail
messages, you can manually turn off the voice
mail indication.
To manually turn off the VOICEMAIL light:
1. Follow steps 1 and 2 in the above section.
2. Press the UP and DOWN NavKeys to highlight
Clear Voice Mail, then press the SELECT
softkey.
3. Press the YES softkey to clear the voice mail
indication.
NOTES:
1. Clearing the voice mail indication does not delete any
voice mail messages.
2. If you subscribe to voice mail services, your local telephone
company may alert you to new voice mail messages with a
stutter (broken) dial tone.
Settings
Keypad Tone
Language
LCD Contrast
SELECT
SET
LCD Contrast
Settings
Language
LCD Contrast
Clear Voice Mail
SELECT
Clear Voice Mail
Clear Voice Mail
Indication?
YES No