Filter
Top Products
42
System setup
Set Date
If you subscribe to caller ID service provided by
your local telephone company, the time and date
will automatically be set with an incoming HOME
call.
To manually set the date:
1. Press the MENU softkey in idle mode to enter
the main menu.
2. Press the UP and DOWN NavKeys to select
Settings, then press SELECT softkey to enter
the Settings menu.
3. Press the SELECT softkey to select Set Date.
4. Use the dial pad (0-9) to enter the month (01-
12), day (01-31), and year (2000-2099). You
can also use the UP and DOWN NavKeys to
set the year, month and year.
5. Press the SET softkey to save the setting.
NOTE: If Invalid Date appears on the display, make sure you
are entering 2000-2099 for the year, 01-12 for the month and 01-31
for the day.
Set Time
If you subscribe to caller ID service provided by
your local telephone company, the time and date
will automatically be set with an incoming HOME
call.
To manually set the time:
1. Follow steps 1 and 2 in the above section.
2. Press the UP and DOWN NavKeys to select Set
Time, then press the SELECT softkey.
3. Use the dial pad (0-9) to enter the hour (01-12)
and minutes (00-59), and the dial pad key 2 for
AM and key 7 for PM. You can also use the UP
and DOWN NavKeys to set the hour, minutes,
and AM/PM.
4. Press the SET softkey to save the setting.
NOTE: If Invalid Time appears on the display, make sure you
are entering 01-12 for the hours and 00-59 for the minutes.
SET
info
Set Date
YYYY/MM/DD
2007/01/01
Settings
Set Date
Set Time
Keypad Tone
Select
SET
info
Set Time
12:00 AM
Settings
Set Date
Set Time
Keypad Tone
Select