Filter
Top Products
38
System setup
Record New Ringer
Each recordable ringer can be up to 14 seconds.
Depending on the remaining record time, you can
record multiple ringers. To increase the record
time, you need to delete a ringer melody (see
page 37).
To record a ringer:
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Press the UP and DOWN Navkeys to select
Ringers, then press MENU/SELECT to enter the
Ringers menu.
3. Press the UP and DOWN NavKeys to highlight
Record New Ringer, then press MENU/SELECT.
4. Press the RECORD softkey to begin recording.
Record Ringer after tone will be shown on the
display, then you will hear tone.
5. Record your ringer melody, then press the STOP
softkey.
6. When you are finished recording you can:
• PLAY - press the PLAY softkey to review
the recorded ringer.
• SAVE - press to the SAVE softkey to save
the recorded ringer.
-OR-
• Press OFF/CANCEL to discard the new
recording and exit to the Record New
Ringer menu.
If you save the ringer, you will be prompted to
enter a name for the recorded ringer.
• Use the character chart (page 68) to enter
the ringer name (up to 10 characters),
then press the SAVE softkey to save your
recorded ringer.
Your new recorded ringer will appear in the
Ringer Melody list (page 37).
Ringer for HOME
Ringer for CELL 1
Ringer for CELL 2
Record New Ringer
Ringers
Press RECORD
to start recording
Remaining record
time 0:14
Record New Ringer
RECORD
Recording Complete
Press SAVE
to save recording
or PLAY to review
Record New Ringer
SAVE
PLAY
NOTE: For optimal
recording, place the
handset microphone nine
inches away from the
source that you wish to
record.
Recording...
Record New Ringer
STOP