Filter
Top Products
29
Bluetooth
Add an active device
If you have only one active device, you can add
another paired device to the Active Devices list,
however you can only have one headset on the
Active Devices list.
To add an active device:
1. Press the MENU softkey on the telephone base
while in idle mode.
2. Press the UP and DOWN NavKeys to highlight
Bluetooth, then press the SELECT softkey to
enter the Bluetooth menu.
3. Press the UP and DOWN NavKeys to highlight
Active Devices, then press the SELECT softkey.
4. Press the UP and DOWN NavKeys to select
an empty device number, then press the ADD
softkey.
5. Press the UP and DOWN NavKeys to select one
of the paired devices.
6. Press the SELECT softkey. The paired device that
you selected will be added to the Active Devices
list.
Change PIN (of the telephone base)
The PIN is exchanged between the telephone base
(default is 0000) and your Bluetooth device(s).
To change the PIN:
1. Press the MENU softkey on the telephone base
to enter the main menu.
2. Press the UP and DOWN NavKeys
to highlight
Bluetooth, then press the SELECT softkey to
enter the Bluetooth menu.
3. Press the UP and DOWN NavKeys
to highlight
Change PIN, then press the SELECT softkey.
4.
Enter your desired four-digit code by using the:
• Dial pad keys (0-9).
• LEFT and RIGHT Navkeys to move the cursor
left or right.
• UP or DOWN Navkeys to increase or decrease
the number (0-9).
5. Press the SET softkey to save your setting.
Select
Bluetooth
Active Devices
Paired Devices
Change PIN
Select
Bluetooth
Active Devices
Paired Devices
Change PIN
SET
Change PIN
0000
ADD
Active Devices
X1 My Headset
2 (empty)
Add Device
Mary's Headset
John's Cell
select
INFO
NOTE: Devices on Devices on
the Active Device list
temporarily disconnect
during this process, but
automatically reconnect
afterwards. It may take up to
two minutes to reconnect.