Filter
Top Products
28
Bluetooth
Replace an active device
Replacing a Bluetooth device on the Active Devices
list will replace an active device with a device from
the Paired Devices list.
To replace an active device:
1. Press the MENU softkey on the telephone base
while in idle mode.
2. Press the UP and DOWN NavKeys
to highlight
Bluetooth, then press the SELECT softkey to
enter the Bluetooth menu.
3. Press the DOWN NavKey to highlight Active
Devices, then press the SELECT softkey. The
screen will then display the active devices.
4. Press the UP and DOWN NavKeys to select
the device to replace, then press the OPTIONS
softkey.
5. Press the SELECT softkey to replace a device.
The selected device will now be disconnected.
• If you have other paired devices, you will be
prompted to select an already paired device.
• If you do not have other paired devices, see
pages 23 and 24.
6. Press the UP and DOWN NavKeys to select a
device, then press the SELECT softkey. The
selected device will then replace the previous
device to the Active Devices list.
Remove an active device
Removing an active device will only remove it from
the Active Devices list.
To remove an active device:
1. Follow steps 1 through 4 in the above section.
2. Press the DOWN NavKey to highlight Remove
Device.
3. Press the SELECT softkey to remove the device
from the Active Devices list.
Active Devices
X 1 My Headset
P2 John's Cell
DISCONN
INFO
Options
Select
Device Options
Replace Device
Remove Device
Replace with:
John's Headset
Mary's Cell
Select
INFO
Active Devices
X 1 My Headset
P2 Mary's Cell
DISCONN
INFO
Options
Select
Device Options
Replace Device
Remove Device
Active Devices
X 1 My Headset
P2 John's Cell
DISCONN
INFO
Options