Filter
Top Products
60
Multiple handset
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT conversation to an intercom call.
When your handset displays Press and hold [PTT] to talk, press INTCOM.
Your handset displays Switch to Intercom? Press SELECT to confirm.
If you have a two-handset system, your handset displays Calling other
handset. The destination handset temporarily displays Push to talk
Ended and then Other handset is calling.
If you have three or more handsets, your handset displays Calling
HANDSET Y (Y represents the destination handset number). The
destination handset temporarily displays Push to talk Ended and then
HANDSET X is calling (X represents the originating handset number).
On the destination handset,
press
HOME/FLASH, /SPEAKER, CELL 1,
CELL 2 or any dialing key (0-9 or TONE ) to answer the intercom call.
Both handsets now display Intercom.
To end the intercom call, press OFF/CANCEL or place the handset in the
telephone base or charger. Both handsets display Intercom ended.
End a PTT call
For a one-to-one PTT call, both the originating and destination handsets
can end the PTT call.
For one-to-group PTT calls, the initiating handset can end the PTT call
for the group of handsets on that PTT call. If any one of the destination
handsets leaves the PTT call, the call continues until all participants or the
initiator hangs up.
To end or leave PTT:
Press OFF/CANCEL or place the handset in the telephone base or charger.
The handset displays Push to talk Ended.
NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one
presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
1.
•
•
2.
3.
•
•