Filter
Top Products
57
Multiple handset
Push-to-talk (PTT)
PTT to a single handset
You have 2 ways to begin a PTT call:
If you have two handsets, press and hold PUSH TO TALK when the
handset is not in use.
-OR-
If you have three or more handsets, press PUSH TO TALK when the
handset is not in use. Use the dialing keys to enter a handset number
(1-9 for handsets 1-9, TONE and 0 for handset 10, TONE and 1 for
handset 11 or TONE and 2 for handset 12).
-OR-
Press CID or DIR to scroll to the desired handset then press SELECT
or PUSH TO TALK to create the push-to-talk session.
Your handset displays Connecting to HANDSET X... for a few seconds.
When the connection is made, both your and the destination handsets
display Press and hold [PTT] to talk and beep once.
Press and hold PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast to
the destination handset. While you are speaking, the handset displays PTT
To HANDSET X (X represents the destination handset number).
Release PUSH TO TALK after speaking. Both handsets beep once again.
After the handsets beep, you can press and hold PUSH TO TALK to continue
speaking or the destination handsets can respond (see Answer a PTT call on
page 59).
To end the PTT call, press OFF/CANCEL or END. The handset shows Push
to talk Ended.
-OR-
Place the handset in the telephone base or charger to end the PTT call. The
handset shows Push to talk Ended.
NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one
presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
1.
•
•
2.
3.
4.
5.