Filter
Top Products
23
Bluetooth
Bluetooth setup
Replace an active device
If you already have two active devices on the device list and you want to
activate a different device, you must deactivate one of the two active devices.
To replace an active device:
Press MENU on the handset when it is not in use.
Press CID or DIR to highlight Bluetooth, then
press SELECT.
Press CID or DIR to highlight Device list, then
press SELECT.
Press
CID or DIR
to highlight the device you want to
activate without a prefix D1: or D2:, then press OPTION.
Press
CID or DIR
to highlight Connect, then press
SELECT. The handset displays Only BT devices in slot 1 or
2 can be ready for connection and then a list of devices
for deactivation.
Press
CID or DIR
to highlight the device to be
deactivated, then press NEXT. The handset displays Cell
Phone A is deactivated and you hear a confirmation
tone. The screen then displays Connecting Cell Phone B
to the base...
Depending on your cell phone settings, you may need to
press a key on your cell phone to confirm the connection.
When the new device is successfully activated and
connected, the handset displays Device connected. You
hear a confirmation tone.
NOTE:
When connecting a Bluetooth device to the device list, all
connected devices will be temporarily disconnected until the procedure
is complete. It may take up to 2 minutes to reconnect.
1.
2.
3.
4.
5.
6.
7.
DEVICE LIST
D1:Cell Phone A
D2:Headset A
Cell Phone B
BACK
OPTION
1
BLUETOOTH
Add device
Device list
Download dir
BACK
SELECT
Connecting
Cell Phone B
to the base...
HANDSET
--:-- --/--
CONNECT MENU
1
1
DEACTIVATE
D1:Cell Phone A
D2:Headset A
BACK
NEXT
1
DEVICE LIST
D1:Cell Phone B
D2:Headset A
Cell Phone A
BACK
SELECT
1