Filter
Top Products
15
Bluetooth
Glossary of terms
Below are some terms used in this user’s manual to help you become familiar
with using your Bluetooth devices and your new AT&T telephone system.
Active device slots - the Device list has two active slots for two cell phones,
or one cell phone and one headset. When a device in the list is active it will
have a D1: or D2: in front of the device name. In order to use a Bluetooth
device on a call, it must be in an active slot and be connected.
Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone.
CELL line - the telephone line associated with your cell phone service. On your
TL92273/TL92373/TL92473 handset, press CELL 1 or CELL 2 to use the
cell line.
Connected - when you pair a Bluetooth device to the TL92273/TL92373/
TL92473, it is placed in an active slot and automatically connected. When a
device is connected, a 1 and/or 2 will display after on the handset screen
and the CELL 1 and/or CELL 2/HEADSET light on the telephone base will
be on. If a device loses its connection to the telephone base, it must be
reconnected before you can use the device with the TL92273/TL92373/
TL92473.
Disconnected - when a device is disconnected, 1 and/or 2 displays after
on the handset screen and the CELL 1 and/or CELL 2/HEADSET light on the
telephone base is off.
Discoverable mode - before a Bluetooth enabled device can be paired, it must
be set to this mode. When pairing your cell phone, the telephone base is in
this mode. When pairing a headset, the headset must be set to this mode.
Depending on the manufacturer, this mode is sometimes referred to as Find Me
or Visibility.
HOME line - your conventional telephone land line. On your TL92273/
TL92373/TL92473 handset, press HOME/FLASH to use the home line.
Paired devices - Bluetooth enabled devices (cell phone or headset) that
have shared registration information with the telephone base. A total of four
Bluetooth enabled devices can be paired with the telephone base. However,
only two paired devices can be connected to the base at a time.
Pairing - sometimes refers to as bonding. The process of sharing registration
information between two Bluetooth enabled devices. Your Bluetooth enabled
cell phone or headset must first be paired to the telephone base in order to
use it with this cordless phone system.
PIN - by default, the PIN is 0000 for the telephone base and for most Bluetooth
devices. PIN information must be exchanged between Bluetooth devices before
they can be used. This is also known as a Passkey or Passcode.