AT&T ATTTL92273 Telephone User Manual


 
42
Telephone operation
Telephone operation
Make, answer or end a cell call
The TL92273/TL92373/TL92473 can be used to make or answer calls on
the cell line. You can connect a maximum of 2 Bluetooth enabled cell phones to
the telephone base. Both cell phones can be used on cell calls at the same time.
To make a cell call:
Press CELL 1 or CELL 2. Enter the telephone number, then press DIAL .
-OR-
Enter the telephone number, then press CELL 1 or CELL 2.
To answer a cell call:
Press HOME/FLASH, /SPEAKER, CELL 1, CELL 2 or any dialing key
(0-9 or TONE ).
To end a cell call:
Press OFF/CANCEL, or put the handset in the telephone base or charger.
NOTES:
You can also use your cell phone to answer the call. If you answer with your cell phone, it
disconnects from the telephone base.
If you do not want to answer the call, press REJECT.
When you try to make a cell call but your cell phone is not connected to the base, the
telephone base displays Cellular phone not connected. Please connect to proceed. Refer to
Bluetooth connection from idle mode on page 20 and Connect/disconnect an active device
on page 21.