Filter
Top Products
CONNECT EACH VOICE TERMINAL TO THE SYSTEM
Place the voice terminal in its designated location.
Plug the voice terminal into the system in one of the following ways:
1
2
1
2
If You Have
And
Do This
a direct connection
the connection re-
Go on to step 3. You
from the voice ter-
quires only a single
have already con-
minal to the control
modular voice ter- nected the voice ter-
unit
minal cord
minal to the system in
step 3 of “Prepare
the Voice Terminals,”
page 15.
the connection re-
Plug the loose end of
quires one or more
the modular voice ter-
modular extension
minal cord into the
cords
jack on the extension
cord that terminates
the wiring run from
the control unit loca-
tion. Then go on to
step 3.
a jack field connec-
Plug the loose end of
tion to the control unit
the modular voice ter-
minal cord into the
wall jack at the voice
terminal location.
Then go on to step 3.
Jack field connection
Direct connection
to control unit
A red light comes on next to a button when you plug in the voice terminal.
16