AT&T 1080 Telephone User Manual


 
77
Answering system operation
Remote access
A three-digit security code is required to access
your answering system from any touch-tone
telephone on a different telephone line (away
from your home). This code is pre-set at 111; see
REMOTE CODE (page 59 of the installation guide)
to change it.
1. Dial your telephone number from any touch-
tone telephone.
2. When the answering system answers, enter the
three-digit remote access code (111 unless you
have changed it).
3. Enter the remote commands (see list on next
page).
NOTE: If there is no command entered for 10
seconds, "Remote operation" will be announced. If
there is no command entered for another 10 sec-
onds, the call will end automatically.
4. Hang up to end call and save all undeleted
messages.