AT&T 1080 Telephone User Manual


 
65
Answering system operation
DTAD setup
See DTAD setup in Feature Setup on pages 57-
62 in the installation guide to set up the DTAD
function.
To turn the private message answering system
on or off
The answering function of this phone is
programmable. See ANSWER STATUS on page
57 of the installation guide for programming
instructions.
NOTE: If the ANSWER STATUS setting is
OFF, the answering system of the auto attendant
telephone can still record central messages and
system extension messages.
ANSWER STATUS
Follow the steps below so that the 1080 phone
will record private messages (not the SYS EXT
messages meant for the associated 1070 and
1040 phones). See page 65 for more information.
1. Press [ENTER].
2. Press [ ] or [ ] until you see DTAD SETUP. Press
[ENTER]. The screen will display ANSWER STATUS.
3. Press [ ] or [ ] to choose ON to turn the
answering system on, or OFF to turn the answering
system off.
4. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
NOTE: If the ANSWER STATUS setting is OFF,
the 1080 phone can still record central messages
and extension messages.
DTAD SETUP
ON
ANSWER STATUS
DTAD SETUP
ON
ANSWER STATUS