Filter
Top Products
Chapter 8. Telnet/Terminal Menus
61202076L1-1 TSU 600 User Manual 8-7
Default Unit Passcode
Sets the default passcode for all devices in the table that have passcodes
set to
DEFAULT
, or for any unit not listed in the table.
OK
Returns to the Configure Agent menu.
SNMP Read Community
SNMP Read Community Name defaults to public. NMSs using this
community name have Read access for all supported MIB objects but do
not have the ability to change MIB objects. This value must be set to the
same value on both the TSU 600 and the NMS (OpenView®, etc.) in or-
der for the NMS to have Read access to MIBs supported by the TSU 600.
This value must be a text string of 16 characters or less.
SNMP Read/Write Community
SNMP NMS using this community name have full read/write access to
all supported MIB objects (defaults to private). This setting must be the
same value on both the TSU 600 and the NMS in order for the NMS to
have read/write access to MIBS supported by the TSU 600. This value
must be a text string that is 16 characters or less.
To access other units external to the TSU 600 (proxied units) using an SNMP
MIB browser, append a period and the Unit ID of the external device to the Read
Only and Read/Write community name used in the MIB Browser, for example,
public.4. See Appendix A, Understanding SNMP on page A-1, for more
information.