Filter
Top Products
Chapter 5. Configuration Menu
61202076L1-1 TSU 600 User Manual 5-13
Create Temp Example
A sample selection follows for
Create Temp:
DS0: 01 to 24
PORT:
IDLE, TST, + option module ports
TST
designates which DS0s are used for QRSS testing when activated
under the
TEST Menu. When not used for testing, the TST designation
is identical to
IDLE.
REVIEW MAP
A(B)
Permits a quick review of the number of
DS0s assigned to each port and the number
of unassigned DS0s (
Idle or TST) as defined
in the currently applied Map A(B).
REVIEW TEMP This menu item is operated the same for
the Temp map as is 3)REVIEW MAP A or
Map B.
EDIT TEMP The map in the Temp file can be edited to
whatever configuration is desired. If Map
A had been copied into the Temp file, then
after editing, the Temp file could be
applied to MAP A or MAP B. The menu
operation is identical to
2) CREATE TEMP
with the exception that the existing port
selections display.
APPLY TEMP > A Writes the Temp map into Map A. Pressing
Apply is usually the last step in updating a
map and is accessed automatically at the
end of editing or creating a temporary
map. It can be bypassed at this time by
selecting another menu choice.