Filter
Top Products
Chapter 8. Telnet/Terminal Menus
61202076L1-1 TSU 600 User Manual 8-3
Normally, map configuration involves these steps.
Initializing the Temp Map
Upon entering the DS0 maps configuration menu, the Temp Map re-
flects its last configured state. You can then use the following selections.
Step Action
1 Initializes the Temp Map to one of three config-
urations (current Map A, current Map B, or all
IDLEs). This step is optional.
2 Edits the Temp Map so that it reflects the
desired map configuration.
3 Replaces the current DS0 map A or B configura-
tion with the Temp Map configuration.
Use selections... To initialize...
1, 2, 3 the displayed Temp Map to one of three
configurations.
1, 2 the Temp Map from its current configura-
tion to one which reflects the currently
stored Map A or B configurations, respec-
tively.
3 the Temp Map to an all IDLE state.