Filter
Top Products
Chapter 5. Configuration Menu
61202076L1-1 TSU 600 User Manual 5-5
DTE Timing
The DTE is the source of timing. The TSU 600 uses the incoming DTE
clock to determine the transmission timing. This is typically used in ap-
plications where it is necessary to have the DTE as the primary clock
source (such as limited distance line drivers). See Figure 5-3.
The DTE source timing is restricted from use when a secondary interface
is used at the same time.
Figure 5-3.
DTE Timed Clock Source
U-BR1TE (Slot 1)
The timing mode selection U-BR1TE (Slot 1) works much like DTE tim-
ing except that the clock is derived from the U interface.
1
Clock
23
OPTION SLOTS
NETWORK
INTERFACE
456
DTE
TIMING SOURCE