Filter
Top Products
Chapter 3. Operation
61202076L1-1 TSU 600 User Manual 3-9
Data Port Identification
When configuring the unit, menu selections will include options from
data port submenus. Selecting of data ports is necessary because the
TSU 600 uses a Slot-Port method to identify which data port the menu
item is referencing. If a module containing a
PBX DSX-1 option card
with an
Nx56/64 plug-on interface
is installed in option slot 6, it would
be designated as:
DSX-1 Passthru=6.1
Where slot=6 and port =1.
The DSX-1 is located in option slot 6 and is the first port in that slot.
Nx56/64=6.2
Where slot=6 and port=2.
The Nx is located in Slot 6 and is the second port in that slot.
Viewed from the rear of the TSU 600, the module slots are arranged as
shown in Figure 3-4.
Figure 3-4.
Module Slots, TSU 600
SLOT 4
SLOT 5
SLOT 6
SLOT 1
SLOT 2
SLOT 3
POWER SUPPLY