ADTRAN 1202076L2 Cordless Telephone User Manual


 
Chapter 3. Operation
61202076L1-1 TSU 600 User Manual 3-11
Alternate Methods of Control
T-Watch PRO (ADTRAN PC Program)
T-Watch PRO is the ADTRAN PC control program. It provides complete
control over the configuration of the TSU 600 using a graphical interface
and displays the same status and performance data as the front panel
LCD. This data is displayed in the form of tables and graphs.
The T-Watch PRO program has the following capabilities:
Interfaces with a modem which permits dialing into a remote TSU
600 location to configure the unit or read the status or performance of
the unit.
Receives traps from any TSU product.
Records and creates display performance data over a 30 day period.
Accesses units via the local area network.
T-Watch PRO/LAN Connection
To set up the TSU 600 to work with T-Watch PRO over the LAN, follow
these steps:
Step Action
1
Set the Unit ID using the Front Panel.
See Unit ID on page 6-3 for more information.
2
Set Control Port to SLIP or Normal for 10BaseT (600e
only) using the Front Panel.
3
Configure the
IP address default gateway
, and sub-
net mask using the Front Panel.
The default gateway and subnet masks are not used
for SLIP mode.
4
Follow the installation instructions for T-Watch PRO
to start the program and connect to the unit.