IPedge
Preferences
IPedge UG 06/11 TOSHIBA 115
TAPI Service Provider • Enter the Service Provider Name – This must be set to access the TAPI
service provider to be used – typically, this would be set to: Net Server.
• Setup – Click the Setup button to open a screen to define the TAPI Service
Provider as shown on the following page. The I button is a handy status
indicator for reading the version levels and license codes for the system and
is shown in the Tapi SPI Info screen.
• Login name – Enter your Login name. If a new installation, a client will
automatically be created in Net Server for this name. Many times the
administrator will have defined your client Login name, see your
administrator for the name to use.
• Password – Enter an optional password for protecting the connection,
when needed.
• Extension – Enter the extension number of the phone this Call
Manager is monitoring for call information.
• Hostname – Enter the name of the Server PC where Net Server
resides.
• Use Remote Access Port – Check this box only when connecting
remotely through the Internet. When connected locally through your
LAN, do not check this box.
