Filter
Top Products
IVX S-Class Administrator’s Manual Administrator programming: An introduction
A.3
Feature Phone overlays
Each ESI Feature Phone comes with one overlay for the programmable feature keys. To order
additional overlays, visit the DESI
™
Web site at www.desi.com. You can also download the free
Windows
®
-based software, DESI Lite, which allows you to print on the overlays. For assistance with
DESI products, please consult the DESI Web site.
Tip: Remember that ESI’s Esi-Admin software, available from your ESI Reseller, also lets you print on the
overlays as well as perform certain programming tasks.
Programming basics
You may program from any 24-Key or 48-Key Digital Feature Phone
1
in the system:
1. Press PROGRAM
2
at any digital station. The normal station programming menu prompts will begin
to play.
2. Press HOLD. The “enter password” prompt will play.
3. Enter the Administrator password (default is 4 5 6). Then, to confirm the password, either press #
or wait two seconds. You are now in programming mode. The extension will be automatically
placed in DND, and its display will show:
ADMINISTRATOR
CMD:
4. The system will play the system programming menu. Follow it to program as you wish.
4. The system will play the system programming menu. Follow it to program as you wish.
5. When finished, hang up.
Warning: Always FINISH programming in ANY function BEFORE exiting programming mode (as
needed, press # to accept current entries for function parameters you’re not changing).
Note: The system will automatically exit programming mode after 10 minutes of inactivity.
Example: If your Administrator password is 864, enter programming mode by pressing PROGRAM HOLD
8 6 4 #. (To exit programming mode, hang up.)
1
Although a 12-Key Feature Phone allows you to enter Installer and Administrator programming, we don’t recommend that you
use a 12-Key Feature Phone for programming because of its one-line display and small number of programmable feature keys.
2
Or, if using the 24-Key Feature Phone, press PROG/HELP.