Filter
Top Products
IVX S-Class Administrator’s Manual Function 3: Extension programming
C.3
Function 37: RFID programming
This function relates to ESI Presence Management only, and covers several steps needed to:
• Program RFID tags.
• Access scheduling.
• View tag numbers.
• Set ESI Presence Management parameters.
Note: For more information about ESI Presence Management, consult its Installation Manual (ESI # 0450-0792).
Function 371: Access schedule programming
Access schedules are used to allow or deny door access with electronic keys (“RFID tags” on the
system display) at certain times of the day. Up to seven access schedules can be programmed. Each
schedule has an allow access time and a deny access time for each day of the week. By default, all
access schedules allow access 24 hours a day, seven days a week.
Note: Access schedules don’t take effect until the current time has passed the next schedule time.
For example: if you program a schedule time to deny access Wednesdays at 5:30 PM but it’s
already 5:45 PM on Wednesday when this programming occurs, the change won’t take effect until
the following Wednesday.
1. Using the scroll keys, select the access schedule to be programmed. Press # to confirm.
Range: 1–7.
Note: Schedule 0 (default of full-time access) isn’t selectable.
ACCESS SCHEDULES
1-ACC SCHED1 >
2. Enter the name of the schedule (up to 10 characters in length).
Press # to confirm.
Default: ACC SCHED[x], where [x] represents the access schedule selected in step 1.
ACC SCHED1
NAME:
3. Use the scroll keys to select the day of the week to program for the selected access schedule.
Press # to confirm.
ACC SCHED1
DAY: MONDAY >
If you haven’t yet assigned a allow time (see next step) for this schedule, the display will show
something like:
ACC SCHED1 MON
NO ALLOW TIME
(Continued)