Filter
Top Products
IVX S-Class Administrator’s Manual Function 1: System parameters
B.1
Function 1: System parameters
Function 13: Administrator password
This will display the existing password and prompt for entry of a new password. The password can be
2–8 digits long, followed by #. The default Administrator password is 4 5 6.
Note: Be sure to write down the new password, and store it in a safe place.
Accessing user station programming
Should a user forget his password or if an employee leaves the organization, this feature allows the
Installer or Administrator to enter a user's station programming and operate within it as if he were the
user. From the user’s station, enter the Administrator password when the system prompts for the
user password.
Example: From station 105, entering 4 5 6 # instead of the user password (1 0 5 #) will enter the station’s user
programming. (Default Administrator password shown for this example).