Filter
Top Products
6
SPARE BATTERY CHARGER
Your VTech VT 9241 is equipped with a
spare battery charger built into the
Base Unit. The spare battery charger
allows you to always have a charged
battery available, should your Hand-
set battery discharge during normal
use.
To install the Spare Battery Pack:
1. Open the Base Unit battery com-
partment.
2. Place the spare Battery Pack in the
battery compartment. Make sure the
metal contacts on the underside of
the battery are aligned with charg-
ing contacts in battery compart-
ment.
3. Replace the battery compartment
cover.
4. When the battery is installed prop-
erly, the spare battery LED on the
Base Unit will be illuminated.
5. The spare battery will be fully
charged after 24 hours. Please note
that the SPARE BATT LED will al-
ways be illuminated when a spare
battery is installed.
To order Battery Packs and Headsets,
call VTech Communications at 1-800-
595-9511.