Filter
Top Products
24
OPTIONAL HEADSET INSTALLATION
AND OPERATING INSTRUCTIONS
Your VT 9241 cordless telephone is
equipped with a 2.5mm Headset Jack
for use with an optional accessory
Headset for hands-free operation.
If you choose to use the Headset op-
tion, you must do the following:
INSTALLATION
Obtain an optional accessory Headset,
which is compatible with the VT 9241.
Please contact VTech Communications
Customer Service, toll-free at 1-800-
595-9511 for dealer information in your
local area. You can also purchase a
compatible Headset directly from VTech
Communications Customer Service.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the Handset of your VT 9241. Connect
the plug of the Headset to the jack on
the cordless Handset. The plug should
fit securely. Do not force the connec-
tion.
NOTE: Whenever a compatible
Headset is connected to the
cordless Handset, the micro-
phone on the Handset will be
MUTED. This is done to limit the
effect of background noise.
The following operational characteris-
tics apply to VTech Headsets. The same
may also apply to other (non-VTech)
compatible Headsets, but VTech as-
sumes no responsibility for their per-
formance.
• The VTech brand compatible Head-
set has a reversible, monaural de-
sign. You can wear it on either ear,
leaving one ear free for room con-
versation.
• The headband can be adjusted to
fit the contour of your head. Using
both hands, slide the headband up
or down so that it rests comfortably
on your head with the speaker cush-
ion centered against your ear.
OPERATING INSTRUCTIONS
ON RIGHT EAR
ON LEFT EAR
INT.COM/LOW BATT
900MHz
CORDLESS
LINE1
OFF
LINE2
FLASH
2
ABC
13
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
TONE
0
OPER
HOLD CHAN INT.COM
PGM M EM REDIAL
PAUSE
FLASH
MEM